the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2006 Dodge charger rs730 install


Post ReplyPost New Topic
< Prev Topic Next Topic >
trigga_b 
Member - Posts: 34
Member spacespace
Joined: July 18, 2006
Posted: April 01, 2016 at 7:42 PM / IP Logged Link to Post Post Reply Quote trigga_b
I have the omegalink bypass and Im going to be using d2d. I've accomplished this before years ago, but wanted to make sure I'm doing this correctly. Im having a problem wiring my directed 506t glass and tilt sensor... Correct me if Im wrong, but I can wire the blue wire from the glass sensor and the blue wire from the tilt sensor to the shock sensor blue wire that came with the rs730?. The orange wire from the the tilt sensor goes to 'ground when armed' wire? Also I only connect the thick starter output wire and not the 2nd thin starter output wire?

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, November 28, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer