the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Turn signal brake combiner


Post ReplyPost New Topic
< Prev Topic Next Topic >
akthom 
Member - Posts: 1
Member spacespace
Joined: July 14, 2016
Location: Alaska, United States
Posted: July 14, 2016 at 1:11 AM / IP Logged Link to Post Post Reply Quote akthom
I had at one time a diagram for a turn signal/brake light combiner circuit for cars and trucks. I believe it was done with 5 relays. I looked around and cant find it anymore. Does this sound familiar to anyone. The solid state units that you get at NAPA or other auto parts stores only handle about 2 amps. Not sufficient for a large trailer.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, January 24, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer