the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

QX4 and Pathfinder?


Post ReplyPost New Topic
< Prev Topic Next Topic >
carguy411 
Silver - Posts: 683
Silver spacespace
Joined: April 02, 2002
Location: United States
Posted: May 29, 2003 at 11:40 PM / IP Logged  
ok a friend of mine hass a 2001 Infity QX4
now its just like the pathfinder bt do u know if the pathfinder steath JLaudio enclosure would fit????
also h wants to add a amp to the factry system with BOSE
now in my book i have the PAC interface thats for the Nissans with the BOSE will that work
or just use the high low converter i want to get the best sound quality avalible
thanks
esmith69 
Gold - Posts: 1,511
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 26, 2002
Location: United States
Posted: May 30, 2003 at 1:42 PM / IP Logged  

I'm guessing the amplifier is intended to be used with the JL sub?  In that case as long as you're not replacing the stock bose head unit, you just need to get a good line out converter and tap in to the amplified speaker leads for the rear speakers.  Verify the polarity of the speaker wiring using a DMM, before you make the final connections to the converter.

Those PAC interfaces are really only for adapting an aftermarket head unit so that it will send a compatible signal to the bose amplifiers.

I clicked on the link that goes to the installation manual for the 96-99 model, and at the very top it says for pathfinder and Qx4.  So I'm guessing for the 01 vehicles it's gonna be the same thing, but you might wanna double check the photos on their site to make sure it looks like it'll fit.  Or if you're still in doubt try emailing JL directly.

Ethan
-----
"Patience, persistence, and perspiration make an unbeatable combination for success"
Donate to the12volt.com
carguy411 
Silver - Posts: 683
Silver spacespace
Joined: April 02, 2002
Location: United States
Posted: May 30, 2003 at 2:23 PM / IP Logged  
ok thanks so just get a normal line out converter i dont need the PAC
thanks

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, August 16, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer