'07 FJ Cruiser - remote window up/down

Home / the12volt's Install Bay / Car Security and Convenience / '07 FJ Cruiser - remote window up/down

Welcome Guest :)

Members

< Prev Topic Next Topic >

equalme

Member - Posts: 11

Joined: October 01, 2016

Location: Texas, United States

Posted: November 02, 2016 at 7:27 PM / IP Logged

With my Viper 5906V and Directed 535T. The window switch works fine when using it manually. When I use the remote function, the drive side window is going in the wrong direction.

I have it setup when the alarm trigger, the windows will automatically roll up if they were down. Well the driver window will roll down instead.

Which wiring do I have wrong? I tried switching the UP/DOWN wires around for the driver side but all that did was make my switch opposite now.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.