fortin evo-all rf kit programing

Home / the12volt's Install Bay / Car Security and Convenience / fortin evo-all rf kit programing

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

bogucki

Copper - Posts: 91

Joined: July 11, 2016

Location: Alberta, Canada

Posted: November 17, 2016 at 12:36 PM / IP Logged

hey guys i have a 2013 dodge ram 1500 and i want to install the fortin evo-all stand alone remote starter with a Compustar RF2W1BSP RF Kit and i was wondering how to you program the remote controls to the bypass module ?

thanks

boguckialex

Back to Top

rs specialist

Copper - Posts: 175

Joined: September 30, 2015

Location: Arizona, United States

Posted: November 17, 2016 at 3:09 PM / IP Logged

The Fortin product has to be programmed to accept the RF kit, you may also need the ftd-100 adapter. After flashing the Fortin piece, their website has directions on programming.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.