2007 Equinox, dball2 issues

Home / the12volt's Install Bay / Car Security and Convenience / 2007 Equinox, dball2 issues

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

smokeman1

Platinum - Posts: 1,588

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: December 18, 2016 at 3:48 PM / IP Logged

Is the Viper H3/1 connected?

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

Back to Top

tctdh11

Member - Posts: 9

Joined: December 13, 2016

Location: Indiana, United States

Posted: December 18, 2016 at 7:47 PM / IP Logged

Sure is.. bcm Lt.green plug, pin 14, pink wire

Back to Top

smokeman1

Platinum - Posts: 1,588

Joined: September 14, 2009

Location: Wisconsin, United States

Posted: December 18, 2016 at 8:03 PM / IP Logged

Do you see on the DBALL2 wiring diagram where the Ignition Input/output is connected to the wire at the ignition switch?

It has a diode on it, band towards the viper unit.

H3/6 needs to be connected to a 12 volt source as the input voltage, for the output voltage, of the Viper Ignition wire.

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

Back to Top

tctdh11

Member - Posts: 9

Joined: December 13, 2016

Location: Indiana, United States

Posted: December 18, 2016 at 8:05 PM / IP Logged

Says ignitions or where it's connected. Have a 1a diode inline connected as stated above. H3/6 is not connected due to it not saying that on the diagram. I'll try that tomorrow after work.

Back to Top

tctdh11

Member - Posts: 9

Joined: December 13, 2016

Location: Indiana, United States

Posted: December 18, 2016 at 8:09 PM / IP Logged

I also pm'd you all of the connections I have made running d2d

Back to Top

< Prev Page

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.