Will 535T work with 06 Silverado?

Home / the12volt's Install Bay / Car Security and Convenience / Will 535T work with 06 Silverado?

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

tdbaker021

Copper - Posts: 98

Joined: November 27, 2016

Location: Tennessee, United States

Posted: January 22, 2017 at 11:17 PM / IP Logged

Mark Mizenko wrote:

You need to make sure you make good ground connections, inside the vehicle. And use 10 or 8 gauge wire for power to the window module or it will not work properly (as you described). I think you need to wire right at the motor on that vehicle.

Window automation modules require a lot of current when the key is off

I don't think the wire gauge has much impact on the module. Here is a video using a power probe 3 for power and ground.

https://youtu.be/dBW9poFmYn8

Back to Top

tdbaker021

Copper - Posts: 98

Joined: November 27, 2016

Location: Tennessee, United States

Posted: January 22, 2017 at 11:18 PM / IP Logged

Here's a video of the finished product.

https://youtu.be/mKdL5EElwWs

Back to Top

< Prev Page

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.