remote start - radio powers on and set the alarm

Home / the12volt's Install Bay / Car Security and Convenience / remote start - radio powers on and set the alarm

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

periziv22

Member - Posts: 10

Joined: February 25, 2016

Location: New Jersey, United States

Posted: December 21, 2016 at 10:09 PM / IP Logged

hello,

Every time i remote start the car it will power my radio and it cause my alarm to go off.

There is any way i can make the radio turn on only after i insert the key?

so when i remote start the car the radio will stay off?

Thanks for your help!

Ziv22

Back to Top

periziv22

Member - Posts: 10

Joined: February 25, 2016

Location: New Jersey, United States

Posted: December 21, 2016 at 10:12 PM / IP Logged

2000 durango 4.7L

Viper alarm/remote start

Alpine aftermarket radio.

Ziv22

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.