the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2008 Trailblazer HVAC not working Viper 4706v


Post ReplyPost New Topic
< Prev Topic Next Topic >
zsoccerdude17 
Member - Posts: 20
Member spacespace
Joined: November 05, 2016
Location: Montana, United States
Posted: January 07, 2017 at 9:14 PM / IP Logged Link to Post Post Reply Quote zsoccerdude17
Somebody on here must not, because thats where I found a referance to the brown wire being HVAC.
zsoccerdude17 
Member - Posts: 20
Member spacespace
Joined: November 05, 2016
Location: Montana, United States
Posted: January 07, 2017 at 9:15 PM / IP Logged Link to Post Post Reply Quote zsoccerdude17
Its whatever though, live and learn. I appreciate all the information here. Very helpful.
zsoccerdude17 
Member - Posts: 20
Member spacespace
Joined: November 05, 2016
Location: Montana, United States
Posted: January 08, 2017 at 12:18 PM / IP Logged Link to Post Post Reply Quote zsoccerdude17
Now Ive got another issue,the remote start will shut off after slighlty more than 2 minutes. My flashes from my led diagnostics go 11-11-11-5-11-5-11-11. Not really sure how to interprit that. This dod not happen prior to hooking up the RED / black
zsoccerdude17 
Member - Posts: 20
Member spacespace
Joined: November 05, 2016
Location: Montana, United States
Posted: January 08, 2017 at 12:39 PM / IP Logged Link to Post Post Reply Quote zsoccerdude17
I think i understand the flashes as a history of why the remote start shut down, so my current shutdown status would be 11. 11 Being Wait-to-start input timed out, idk why I would be getting that error??
zsoccerdude17 
Member - Posts: 20
Member spacespace
Joined: November 05, 2016
Location: Montana, United States
Posted: January 08, 2017 at 11:53 PM / IP Logged Link to Post Post Reply Quote zsoccerdude17
Any insight on this issue? Just not sure how it went from working fine. to doing this overnight.
kreg357 
Platinum - Posts: 7,494
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: New York, United States
Posted: January 09, 2017 at 4:16 AM / IP Logged Link to Post Post Reply Quote kreg357
First, I would double check all the connectors to ensure they were completely seated.
Next, I would make sure my Viper to Chassis Ground connection was perfect. Use a soldered-on terminal ring and fasten to a solid, paint and rust free metal frame area.
Does your 2008 Blazer have "one touch starting"? That is where you can quickly turn the key to START and release it back to RUN
and the ECM will control the starter crank time and start the engine.
If yes, are you running the Viper in Tach or Virtual Tach Mode? If yes, try switching over to Engine Checking = Fixed and go with
a one second crank time. See if that helps.
Soldering is fun!
zsoccerdude17 
Member - Posts: 20
Member spacespace
Joined: November 05, 2016
Location: Montana, United States
Posted: January 21, 2017 at 12:34 PM / IP Logged Link to Post Post Reply Quote zsoccerdude17
Checked my connections, they are solid. I am currently running off virtual tach. Im not sure how to change cranking time?
zsoccerdude17 
Member - Posts: 20
Member spacespace
Joined: November 05, 2016
Location: Montana, United States
Posted: January 21, 2017 at 12:48 PM / IP Logged Link to Post Post Reply Quote zsoccerdude17
found it in my instruction sheet, i set engine checking to off. same thing. Shuts off around 10 or 11 minutes left . Timer is set at 12 minutes
zsoccerdude17 
Member - Posts: 20
Member spacespace
Joined: November 05, 2016
Location: Montana, United States
Posted: January 21, 2017 at 1:15 PM / IP Logged Link to Post Post Reply Quote zsoccerdude17
I should also note. This is a factory refurb unit.
Page of 2

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, October 27, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer