spacer spacer spacer spacer

2010 ford fusion manual transmission, RS

Post ReplyPost New Topic
< Prev Topic Next Topic >
Member - Posts: 12
Member spacespace
Joined: September 11, 2016
Location: Alberta, Canada
Posted: January 10, 2017 at 8:00 PM / IP Logged Link to Post Post Reply Quote darmck
1) A while back I installed a Titan TS-133 in a 2010 ford fusion manual transmission. I couldnt program a Fortin EVO-ALL at the time so I used a lower model bypass. However this gave the issue of the radio staying on after turning the vehicle off putting it into ready mode. How would I go about wiring in to shutdown the RAP in this situation? The EVO-ALL's have specific hookups for the RAP but the model I used is just purely a bypass.
2) Looking at a prostart system ( CT-4311TW for instance ) the AUX 1 output lists an option of negative accessory output, when would this be used?
I'm just trying to increase my knowledge and understanding so I can have an easier time installing in the future. Thanks in advance for the help, advice and patience.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Sunday, November 27, 2022 • Copyright © 1999-2022, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer