07 GX470 alarm not disarming

Home / the12volt's Install Bay / Car Security and Convenience / 07 GX470 alarm not disarming

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jstruckman

Copper - Posts: 465

Joined: May 03, 2004

Posted: January 21, 2017 at 4:20 PM / IP Logged

Okay I am at a loss on this one. Keysense will not disarm the factory alarm during remote start. Verified the connection with a meter. ADS-TB is sending ground to wire, even tried a direct ground to the wire after alarm was armed. Alarm goes off every time when remote started. Unlock wire is connected to disarm / unlock and will shut the alarm off when unlock is pressed. Ended up using the disarm wire along with the unlock wire to the vehicle and had to not use the keysense wire from the ADS-TB because with the keysense wire connected the doors would not stay locked while remote started. Doors would lock then unlock automatically.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.