RF 1000x1

Home / the12volt's Install Bay / Car Audio / RF 1000x1 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

cbr900

Member - Posts: 6

Joined: June 21, 2002

Location: United States

Posted: June 21, 2002 at 7:07 PM / IP Logged

What is the best way to run 3 audiobahn 12's to a 1000 watt fosgate

Back to Top

ih8u37

Copper - Posts: 54

Joined: June 06, 2002

Posted: June 22, 2002 at 2:05 PM / IP Logged

cbr,

We need a bit more info. What's the RMS power rating on the subs, & are they single or dual voice coil? Is the 1000 rockford amp 100watts peak or rms? What's the lowest ohm load it's capable of handling?

Back to Top

cbr900

Member - Posts: 6

Joined: June 21, 2002

Location: United States

Posted: June 22, 2002 at 8:02 PM / IP Logged

I don't no that much about the subs they are 500 watt and the amp

is 1000x1 that's all i know.

Back to Top

bberman1

Gold - Posts: 2,314

Joined: March 11, 2002

Location: United States

Posted: June 22, 2002 at 9:17 PM / IP Logged

If you can look on one of the subs and get the model #.

Back to Top

cbr900

Member - Posts: 6

Joined: June 21, 2002

Location: United States

Posted: June 23, 2002 at 12:26 AM / IP Logged

abb121

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: June 23, 2002 at 12:56 AM / IP Logged

These are a SVC subwoofer that is rated at 400 watts RMS. I would run these in series and brdge the amp into 2 ohm load. If you were to run the subs in parallel to the amp, you will be running the amp in a 1 ohm load and the amp will over heat.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

cbr900

Member - Posts: 6

Joined: June 21, 2002

Location: United States

Posted: June 23, 2002 at 10:43 AM / IP Logged

series-series or series-parallel

Back to Top

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: June 23, 2002 at 11:07 AM / IP Logged

Run the subs in series ( + to - to + to - to + to - ) and then run the + wire to one channel of the amp and the - to the other channle of the amp in a bridged configuration. I think this is what you are asking, but I'm not sure from your last post.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

RF 1000x1

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.