2010 Toyota Matrix, Fortin EVO-ALL

Home / the12volt's Install Bay / Car Security and Convenience / 2010 Toyota Matrix, Fortin EVO-ALL

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

888v888

Member - Posts: 1

Joined: February 02, 2017

Location: Canada

Posted: February 02, 2017 at 12:30 PM / IP Logged

Good day! I got the module Fortin EVO-ALL (with cut wiring ) , I would like to know if you can connect to Toyota Matrix 2010 to autorun a three-time press closing lock for regular key ? ( on the tip of standard key markings does not, and should only point ) search on the Internet nothing concrete has been given(( even specific wiring diagrams Toyota Matrix 2010 + Fortin EVO-ALL did(( if this feature is possible, tell me how to implement it or maybe there is a Pinout of the harnesses bypass . thank you.

I quasicapital list appreciated

Toyota Matrix 2010

Back to Top

dman007

Copper - Posts: 106

Joined: November 24, 2002

Location: Florida, United States

Posted: February 03, 2017 at 5:51 PM / IP Logged

According to the Fortin website, EVO-ALL for a 2010 Matrix does not support 3 lock Remote Starting. Only the EVO-One unit will provide what you are looking for. You can check it out for yourself. http://fortin.ca/en/

DTS Performance

St Petersburg, FL

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.