the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Motorcycle fender


Post ReplyPost New Topic
< Prev Topic Next Topic >
zackswrx 
Member - Posts: 1
Member spacespace
Joined: February 15, 2017
Posted: February 15, 2017 at 6:50 AM / IP Logged Link to Post Post Reply Quote zackswrx
Im thinking of designing my own fender from fiberglass. Ive been watching a bunch of videos on how to fiberglass and I want to try it. If even just to learn.
My question is, if i make a mold out of foam can i wrap it in foil and get the fiberglass to release off of it? I dont really want to take a chance of screwing up the original fender just in case.
Any tips would be greatly appreciated!

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, September 19, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer