the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2010 Ford Taurus brake light wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
dasbill2014 
Member - Posts: 1
Member spacespace
Joined: March 20, 2017
Location: California, United States
Posted: March 20, 2017 at 5:53 PM / IP Logged Link to Post Post Reply Quote dasbill2014
Need a little help trying to find the wiring diagram for a 2010 Ford Taurus High Mounted brake light. The connection has come off the rear window and nothing is making the light work again. I have tested both connections and I have power. The light is working as well, the connection on the glass are not working (Yes I even used Permantex conductive glue). I am going to hard wire the high mounted brake light but I need the wiring schematics to I know where the wires come out at. Any help out?

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, August 22, 2017 • Copyright © 1999-2017 the12volt.com Donate to the12volt.com Advertising Top of Page
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Donate to the12volt.com
Top
the12volt.com spacer
the12volt.com spacer