2007 GMC Envoy Stereo - Cut Harness

Home / the12volt's Install Bay / Car Audio / 2007 GMC Envoy Stereo - Cut Harness

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ewilli12

Member - Posts: 1

Joined: May 01, 2017

Location: Indiana, United States

Posted: May 01, 2017 at 8:30 AM / IP Logged

I am installing an aftermarket stero in my 2007 GMC Envoy. However, the audio factory harness has been cut. I have purchased a new male harness to replace the factory harness (https://www.carid.com/metra/wiring-harness-for-oem-radio-mpn-71-2003-1.html). However, I need help in identifying the wires coming from the vehicle so that I can match them up with wires on the new male harness.

Any help would be greatly appreciated!!

Back to Top

mtxtech

Member - Posts: 19

Joined: April 18, 2017

Location: Arizona, United States

Posted: May 01, 2017 at 3:46 PM / IP Logged

constant +12v - Orange

Ground - Black/white

Radio Ignition - Class two serial data

Factory amp turn on - + Pink

Front left speaker - +Tan - -Grey

Front right speaker - +Lt, green - -Dk, green

Rear left speaker - +brown - -yellow

Rear right speaker - +Dk, blue - -lt, Blue

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.