2011 Honda Pilot LX - Split rear output into 2?

Home / the12volt's Install Bay / Car Audio / 2011 Honda Pilot LX - Split rear output into 2?

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

elsabaw

Member - Posts: 17

This member has made a donation to the12volt.com. Click here for more info.

Joined: October 29, 2007

Location: North Carolina, United States

Posted: July 17, 2017 at 10:55 AM / IP Logged

Just discovered there is no factory plug when trying to install 3.5" speaker in the 3rd row pillar trim in cargo area. Trims EX and above have factory 3rd row speaker in pillar trim. I ran with the assumption all trims used the same wire harness with unused plugs taped off. I have a JVC single DIN going into an Alpine 5 channel amp. I want to use quick wires so that I don't have to run wires from the amp all over the cabin to each speaker. Please advise with helpful suggestions/solutions. Been trying to do this aftermarket install for years but couldnt (family of 6 with young kids 2011 Honda Pilot LX - Split rear output into 2? -- posted image.

2011 Honda Pilot LX - Split rear output into 2? -- posted image.

). I thank you for your help.

Tony G

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.