08 Acura MDX remote start

Hey Guys, I installed a remote start in my mdx last December its been working great but I had the car sitting for awhile and the battery went dead, I replaced the battery the doors lock and unlock from the viper remote but wont start the car anymore I double checked all wiring and they are all soldered and in place, I even reflashed the dball. When I press the remote start all that happens is doors unlock then lock and the nav screen turns on then off no dash lights nothing any help would be great thanks. Unit installed: Viper 4806V and DBall 2 on latest firmware.

Most likely a blown remote start fuse. The wiper circuit is fused by the car's ignition fuse 30+ amp so the remote start fuse always blows before the factory one if the wipers are left on and blocked by snow/ice and the car is remote started.