the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

DEI 530T Install in 9th Gen Civic Si Coupe


Post ReplyPost New Topic
< Prev Topic Next Topic >
daves06xa 
Member - Posts: 9
Member spacespace
Joined: July 07, 2017
Location: Florida, United States
Posted: October 27, 2017 at 3:48 PM / IP Logged Link to Post Post Reply Quote daves06xa
Finishing up my install of viper 5906v with immobilizer bypass and Im trying to incoperate the DEI 530T to roll up windows when arming and using aux. channel to roll up and down. i have driver door panel off and im looking at the connector wires and ive reviewed the 530T install manual. My question is does anyone have the wiring diagram for the 9 gen civic si? I need to know which is switches and motor power for driver and passanger switch. If I ABSOLUTELY need to I could ring all the wires out but that will take awhile. Ive been successful using the resources in this forum thus far so Im hoping someone has already tackled this install. No since in reinventing the wheel.. Thanks again for all your help. If I can help with the viper install feel free to hit me up.. this was my first install and it was very complicated.. especially with push to start and vehicle imobilizer...
tonton81 
Member - Posts: 9
Member spacespace
Joined: June 27, 2019
Location: Quebec, Canada
Posted: June 27, 2019 at 12:41 PM / IP Logged Link to Post Post Reply Quote tonton81
dont know if you still need help with 9th gen, i centralized 2 modules piggybacked in the free space in dash behind glovebox, routed 4 wire cabling to each door, i cut the motor wires, switch side and motor side connected to the cable, and did the connections at the glovebox. Works pretty well and runs standalone currently using the PKE2012 keyless from DEI for keyless entry and auto roll up on lock
catback 
Silver - Posts: 703
Silver spacespace
Joined: August 13, 2002
Location: Canada
Posted: June 28, 2019 at 11:14 AM / IP Logged Link to Post Post Reply Quote catback
tonton81 wrote:
dont know if you still need help with 9th gen
I sure hope it doesn't take a year and 8+ months for someone to install a 5906v with a 530T
tonton81 
Member - Posts: 9
Member spacespace
Joined: June 27, 2019
Location: Quebec, Canada
Posted: July 01, 2019 at 4:46 PM / IP Logged Link to Post Post Reply Quote tonton81
true, but some people put it aside and forget about it.
This may help others who want to get involved, whether they use it standalone or with an alarm system
daves06xa 
Member - Posts: 9
Member spacespace
Joined: July 07, 2017
Location: Florida, United States
Posted: July 02, 2019 at 7:17 AM / IP Logged Link to Post Post Reply Quote daves06xa
Wow. Just came in from the garage after connecting the last wire. I just looked at the Calander and I've been out there a year and a half. I lost track of time. Everything works as it should so I guess now I will take it for a drive.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer