the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Trailer light wiring.


Post ReplyPost New Topic
< Prev Topic Next Topic >
austinjasonxxx 
Member - Posts: 7
Member spacespace
Joined: August 04, 2013
Location: Kansas, United States
Posted: November 09, 2017 at 1:16 PM / IP Logged Link to Post Post Reply Quote austinjasonxxx
I used the wire in a seven pole trailer plug that normally controls the running lights to power after market hazard lights on the trailer. There’s a separate toggle switch for the hazard lights and the running lights. When you turn on the running lights the hazard lights come on.
Is it possible to wire a relay so that when the running lights are on the hazards or not but could be if the hazard lights switch was switched on but normally the hazards would be off.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer