Immobiliser Relay, 1995 Honda Prelude

Home / the12volt's Install Bay / Car Security and Convenience / Immobiliser Relay, 1995 Honda Prelude

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

uggs4u

Member - Posts: 20

Joined: September 21, 2005

Location: United Kingdom

Posted: February 06, 2018 at 9:47 AM / IP Logged

Hi I need to add a relay to my immobiliser which can only handle 10 amps! Im looking to interrupt the starter circuit which is probably around 30 amps!How can I wire in the extra relay to achieve this? Its a standard immobiliser unit with 2 wire which interrupt the circuit...

Thanks in advance Uggs

Back to Top

uggs4u

Member - Posts: 20

Joined: September 21, 2005

Location: United Kingdom

Posted: February 06, 2018 at 9:48 AM / IP Logged

The immobiliser unit is Remusshield and im fitting it to a 1995 Honda Prelude

Back to Top

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: February 06, 2018 at 5:41 PM / IP Logged

There is no way the starter circuit pulls 30 amps. Maybe 4, but no way 30. I am talking about the starter circuit inside the car between the key cylinder and the starter relay or solenoid.

Back to Top

uggs4u

Member - Posts: 20

Joined: September 21, 2005

Location: United Kingdom

Posted: February 07, 2018 at 3:49 AM / IP Logged

There is no starter relay...Ive been advised to add a relay just to be safe anyway.Can you help me with my original query dude?

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.