the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Raising Sound Stage


Post ReplyPost New Topic
< Prev Topic Next Topic >
vandelet 
Member - Posts: 1
Member spacespace
Joined: January 30, 2004
Location: United States
Posted: March 01, 2018 at 3:28 PM / IP Logged Link to Post Post Reply Quote vandelet
I am satisfied with the sound quality of my highs, mids, and bass. The problem is that I used coax in factory locations (calf level in the doors) for highs and the staging is not good. I would like to keep what I have but add additional tweeters up front to raise the sound stage. What's the best way to do this (wiring, xovers, etc.). I'm presently running 2 of 4 channels from a JL e4300 to power the front speakers at 4 ohms. Thanks for your input.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer