spacer spacer spacer spacer

Relay Chatter When Wiring to Dome Light

Post ReplyPost New Topic
< Prev Topic Next Topic >
Silver - Posts: 1,338
Silver spacespace
Joined: August 08, 2012
Posted: March 27, 2018 at 4:25 PM / IP Logged  
You are sending a pulsed ground to a coil and magnetic switch. Capacitor should be on the 85 and 86 to smooth out the dome light circuit ground dimming pulse. A diode may also be needed to keep the capacitor from back feeding the dome light circuit ground. Band towards the vehicle side. If the lights stay on to long after the dome circuit goes off use a smaller value capacitor.
Copper - Posts: 340
Copper spacespace
Joined: February 04, 2018
Location: Quebec, Canada
Posted: March 27, 2018 at 6:17 PM / IP Logged  
i am an idiot wrote:
Capacitor across 85 and 86.
Changing the capacitor to be across the coil (85-86) should improve ir.
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Monday, April 15, 2024 • Copyright © 1999-2024, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer