Viper 5706V Shock Sensor

Home / the12volt's Install Bay / Car Security and Convenience / Viper 5706V Shock Sensor

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dman007

Copper - Posts: 106

Joined: November 24, 2002

Location: Florida, United States

Posted: November 25, 2018 at 6:47 PM / IP Logged

When programming Viper 5706V alarm/remote starter with bitwriter. Shock sensor sensitivity comes up as an option. What is the relation of this bitwriter adjustment to the actually dial adjustment on the shock sensor. Would I need to turn up dial all the way, then narrow down the adjustment with bitwriter?

DTS Performance

St Petersburg, FL

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.