2003 Kia Optima Alarm wiring
Welcome Guest :)
Incubus777
Member -
Posts: 6
Joined: May 01, 2003
Location: United States
Posted: June 06, 2003 at 1:32 PM / IP Logged
Could someone please give me the alarm wiring diagram for a 2003 Kia Optima.
Thanx!
-Cory
If I had a dime for every time you walked away, I could afford to not give a sh*t and buy a drink and drown the day.
the12volt
Administrator -
Posts: 3,956
Joined: March 07, 2002
Location: Louisiana, United States
Posted: June 06, 2003 at 2:00 PM / IP Logged
Remote Starter Wiring Colors and Notes |
Function | | Vehicle Color | Location |
Start: | | Yellow (+) | Ignition switch harness |
Ignition #1: | | Pink (+) | Ignition switch harness |
Ignition #2: | | N/A | Ignition switch harness |
Ignition #3: | | N/A | Ignition switch harness |
Accessory: | | Orange (+) | Ignition switch harness |
Brake Light: | | Green(+) | Brake pedal switch |
Tach Signal: | | White (AC) | Instrument cluster or ECM* |
Parking Lights: | | Pink or BROWN / Orange (+) | Fuse box |
Headlights: | | N/A | |
OEM Alarm Disarm: | | Factory remote only | |
OEM Alarm Arm: | | Factory remote only | |
Diesel Glow Plug: | | N/A | |
Clutch Bypass Wire: | | N/A | |
Notes: | | *The Engine Control Module (ECM) is behind the lower center of the dash. On the 2.4L can also use white or orange at the igni |
the12volt • Support the12volt.com
the12volt
Administrator -
Posts: 3,956
Joined: March 07, 2002
Location: Louisiana, United States
Posted: June 06, 2003 at 2:01 PM / IP Logged
Alarm and Keyless Entry Wiring Colors and Notes |
Function | | Vehicle Color | Location |
Constant +12 Volts: | | Red (x2) | Ignition switch harness |
Starter Kill: | | Yellow (+) | Ignition switch harness |
Ignition +12 Volts: | | Pink (+) | Ignition switch harness |
Dome Lights/Superv: | | Yellow (-) | Drivers kick panel or ETACS** |
OEM Horn: | | Yellow (-) | Steering column harness |
Power Lock: | | White (-) | Back of the fuse box or ETACS** |
Power Unlock: | | Blue (-) | Back of the fuse box or ETACS** |
Trunk Release: | | Blue (+) | Drivers kick panel harness to the rear |
Alarm Input Wire: | | Yellow (-) | Drivers kick panel or ETACS** |
Notes: | | **The Electronic Time and Alarm Control System (ETACS) module is attached to the underdash fuse box. |
the12volt • Support the12volt.com
Follow the12volt.com
Tuesday, January 21, 2025
• Copyright © 1999-2025 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.