2014 Toyota Camry w/Smart Key OEM Alarm Equipped

I have installed an plug and play remote starter similar to fortin evo-all and an carlink acl6 to use with my phone. The carlink have a wire that said to connect to horn + (pulse) and /or siren + constant so i get notifications if oem alarm triggered and i want to turn on my rear defogger after the remote started any advise

It might be possible to add this feature. Here is the Rear Defrost wire info : Rear Defrost    GREEN (-)     PASSENGER KICK GRAY 18 PIN CONN, PIN 18 What you need is an output from the EVO-ALL that would supply the needed (-) signal after the engine is started. There are a bunch of ways to go at this point depending on your needs and budget. The least expensive and flexible would be using a (-) ACC output from the EVO-ALL. It wouldn turn on the Defroster for the entire R/S runtime every time the car was remote started. You could install a "Winter / Summer" toggle switch in the line to control the defroster operation. More expensive options would be a 7 minute timer module controlled by an EVO-ALL output. Your best bet to contact the system supplier and get their input. A call to Fortin might work to see if there are any useable outputs from the EVO-ALL with that application and firmware.Soldering is fun!

Thanks kreg357, so about the 7 mins timer module? Where do i get it and which evo- all output do i use? Also could i use carlink aux to turn on the rear defogger when needed? Again really appreciate your helps thanks

I am not familiar with your particular system. I typically install iDatalink units. I would contact the supplier of that system for information about the CarLink app and capabilities. Fortin would be a good source for info about the EVO-ALL with that specific firmware and any available outputs. There are many +12V DC timers available on eBay and similar sites. Look for one that is programable to a 7 minutes output time. Something like this will work ( V3 version ).   Search eBay for this : DC5v-12v-Adjustable-Time-Delay-Switch-Timer-MCU-Relay-Module-Digital-LED-displaySoldering is fun!

Thank you kreg357