the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

High Idle, 1993 Dodge W250, Remote Start


Post ReplyPost New Topic
< Prev Topic Next Topic >
twelvevalve 
Member - Posts: 2
Member spacespace
Joined: January 20, 2020
Location: Ontario, Canada
Posted: January 26, 2020 at 1:12 AM / IP Logged Link to Post Post Reply Quote twelvevalve
I have a 93 Dodge W250 it has a mechanical throttle. I just installed a remote start and what I am trying to do is have a high idle controlled by the trunk release button on the remote. I currently use an idle stop solenoid, however it is not strong enough. I need to bump the pedal and the solenoid just holds it, so this obviously won't work via remote. I was originally planning on using a strong solenoid to pull the cable but I'm having a difficult time sourcing. I was then looking at linear actuators. I can get a relay that will automatically retract the actuator when the power is removed but this seems overly complicated. I'd really like to keep it simple. I'm hoping that I'm just over thinking this and someone might have a better idea. Thanks
cpalmer 
Copper - Posts: 88
Copper spacespace
Joined: March 18, 2007
Location: United States
Posted: January 26, 2020 at 9:41 AM / IP Logged Link to Post Post Reply Quote cpalmer
This might be too simple but how about an ol skool cable driven high idle kit. The kind you put on the dash and turn the knob. Then set it before you get out of the truck at night.
twelvevalve 
Member - Posts: 2
Member spacespace
Joined: January 20, 2020
Location: Ontario, Canada
Posted: January 26, 2020 at 12:01 PM / IP Logged Link to Post Post Reply Quote twelvevalve
I don't really want it to immediately go in to high idle, I'd like to give it a minute or so to build oil pressure first.
iskidoo 
Silver - Posts: 1,016
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 08, 2002
Location: Maine, United States
Posted: January 26, 2020 at 9:41 PM / IP Logged Link to Post Post Reply Quote iskidoo
Would a directed 522T trunk solenoid work to get that initial needed strong pull?
Steve G

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, October 24, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer