Crimp On Connector Identification, 2011 Holden Colorado

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / Crimp On Connector Identification, 2011 Holden Colorado

Welcome Guest :)

Members

< Prev Topic Next Topic >

simplejoe

Member - Posts: 1

Joined: March 15, 2020

Location: Australia

Posted: March 15, 2020 at 6:23 AM / IP Logged

I am trying to add power for a dash camera and a few other electronics inside the cab of my 2011 Holden Colorado which I assume uses similar connectors to the rest of GM's products.

I would like to avoid tapping into the cigarette lighter or any other circuit and instead use some of the spare fuse spots in the cabins fuse panel but I can't seem to find any connectors that look similar to what I am after.

It is sized between a regular blade connector (6.3mm and 5.Xmm) and has a clip in locking tab on the connector itself, any pointers in the right direction would be a great help.

Crimp On Connector Identification, 2011 Holden Colorado - Last Post -- posted image.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.