2004 Ford F-150, Door - and + Input Wires on Manual Locks

Home / the12volt's Install Bay / Car Security and Convenience / 2004 Ford F-150, Door - and + Input Wires on Manual Locks

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

turntostone757

Member - Posts: 2

Joined: May 03, 2020

Location: Virginia, United States

Posted: May 03, 2020 at 11:17 PM / IP Logged

My truck is manual everything. No power. Where would I hook the door pos and neg. Input wires?

It's an excalibur al-560. Any help would be appreciated. 2004 Ford F-150, Door - and + Input Wires on Manual Locks - Last Post -- posted image.

Smj

Back to Top

Search for other posts by turntostone757

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: May 04, 2020 at 4:46 AM / IP Logged

The violet wire of the alarm needs to connect to the black with a light blue striped wire at the drivers side kick panel. It will be inside the large harness that goes to the rear of the truck. To test it to make sure it is the correct wire, it will read 12 volts anytime the dome light is lit.

Back to Top

turntostone757

Member - Posts: 2

Joined: May 03, 2020

Location: Virginia, United States

Posted: May 04, 2020 at 10:09 AM / IP Logged

Ok. Thanks for reply. I've seen a bunch of different things on a bunch of different websites. So I can just cut and tape off all the wires including dome light to relay? And the green wore and the blue wire just cut??

Smj

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.