2007 Lincoln Navigator, Radio Wiring Harness Diagram

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2007 Lincoln Navigator, Radio Wiring Harness Diagram

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

alexander holli

Member - Posts: 1

Joined: August 12, 2020

Location: Minnesota, United States

Posted: August 12, 2020 at 1:30 AM / IP Logged

Im trying to install an aftermarket radio. I had to purchase a replacement radio wiring harness because i smashed the original one trying to push a pin out smh Those pins are ridiculous! But anyway i tried going wire for wire transferring them from the old plug to the new one and its not working. I also noticed that the red 12v ignition/switched wire isnt connected to anything. Pleasee help!!

Back to Top

Search for other posts by alexander holli

eguru

Copper - Posts: 340

Joined: February 04, 2018

Location: Quebec, Canada

Posted: August 14, 2020 at 6:16 PM / IP Logged

What are you using for a SWI? The HU accessory wire would need to connect to a SWI that connects to you car's CANbus.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.