the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Wiring Speakers After Bypassing Factory Amp, 2011 Honda Accord


Post ReplyPost New Topic
< Prev Topic Next Topic >
shadydee2 
Member - Posts: 30
Member spacespace
Joined: April 13, 2014
Location: California, Uruguay
Posted: August 27, 2020 at 8:01 PM / IP Logged Link to Post Post Reply Quote shadydee2
2011 accord exl coupe. I had to bypass the factory amp the speaker wires from the stereo connector a have an additional wire grey with the letters shg which i believe stand for shielded ground. I need to know if i include this additional ground when i solder the speaker wires from the radio to the speaker wires from the other connector that was formally plugged into the amp.
daren obrecht

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer