the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Relay Diagram No10 Four Wire Reversal


Post ReplyPost New Topic
< Prev Topic Next Topic >
shaunie61 
Copper - Posts: 47
Copper spacespace
Joined: February 14, 2019
Location: United Kingdom
Posted: September 17, 2020 at 10:24 AM / IP Logged  
That said, I'm not sure I will be able to fit it inside the 6.3 spade connectors...
For the other outputs from the relays to the motor legs what size would be your minimum? The factory wiring is incredibly thin which suggested to me that I only needed to go one size higher for this to work and work well. It works but the motors are slow to lock and unlock compared to the factory switched circuit.
Maybe the new cables need to be upgraded to enable the motors to work without restrictions? I have searched online but cant find the information I need,
TIA
Shaun
geepherder 
Platinum - Posts: 3,584
Platinum spaceThis member consistently provides reliable informationspace
Joined: October 27, 2003
Posted: September 17, 2020 at 12:28 PM / IP Logged  
The one's with the yellow insulation are for 10-12 gauge wiring.
Are the relays you are using old, or new? As they are used repeatedly, the contacts will have higher than normal resistance. Installing a suppression diode across the coils will help limit this. Topic closed. See https://www.the12volt.com/installbay/forum_posts.asp?tid=145339
My ex once told me I have a perfect face for radio.
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, June 18, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer