the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2013 Volkswagen Jetta GLI, Radio & Remote Starter Wiring Diagram


Post ReplyPost New Topic
< Prev Topic Next Topic >
sfxgeek 
Member - Posts: 2
Member spacespace
Joined: November 18, 2020
Location: British Columbia, Canada
Posted: November 18, 2020 at 10:59 PM / IP Logged Link to Post Post Reply Quote sfxgeek
Trying to replace the factory Delphi double din radio and install a remote starter and can’t find any wiring diagrams anywhere for this car. Can anybody point me in the right direction please ? Have been scouring the internet for weeks and keep coming up empty handed.
Btw this is for the push to start edition of the car .
Thanks in advance
J
Learning car installs for my kids cars
mgoetz74 
Silver - Posts: 424
Silver spaceThis member consistently provides reliable informationspace
Joined: February 15, 2012
Location: United States
Posted: November 19, 2020 at 9:35 AM / IP Logged Link to Post Post Reply Quote mgoetz74
only two remote starts work on that car...
compustar
CMVWXA0-don't have to loose a key-uses factory key fob and push lock button 3x to remote start
RS1B-DC3-loose a key- a key will have to stay in the vehicle at all times
as far as the radio what are you trying to do? if replacing just use a data bus harness and make life simpler- pac RP4-VW11
33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!
sfxgeek 
Member - Posts: 2
Member spacespace
Joined: November 18, 2020
Location: British Columbia, Canada
Posted: November 19, 2020 at 3:06 PM / IP Logged Link to Post Post Reply Quote sfxgeek
Thanks for your reply, the starter that I purchased (because I was told it would work on my car, maybe I got scammed) is a Firstech DC3-LC Start It. I have it installed with the T harness and when I go to program it all the right LEDs flash green like it's happy, but when I go to try to remote start it gives an error code of 8 light flashes which according to the online manual means the tach isn't programmed correct, and on the dashboard there is "remote out of range" message that comes up.
As for the deck I bought a Planet Audio P9950CPA and was just unclear on a couple of the wirings needed , that's why I was looking for the wiring diagrams for the car.
Any help is greatly appreciated.
Thanks
J
Learning car installs for my kids cars
mgoetz74 
Silver - Posts: 424
Silver spaceThis member consistently provides reliable informationspace
Joined: February 15, 2012
Location: United States
Posted: November 20, 2020 at 9:52 AM / IP Logged Link to Post Post Reply Quote mgoetz74
firstech is the same company a compustar. Probably just need to program the tach which is usually start vechile, push and hold brake pedal, push programing button on side of remote start brain, let off brake. leds should turn green and parking lights should flash. I couldn't find a manual for that RS you mentioned but all compustars work the same way. as For the key error code I think that normal (not 100%) and should go away when your get in the car
or start car, push and hold brake pedal, push and hold RS (about 3 seconds) button on the remote let off brake pedal
33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer