Sony MEX-N5300BT, Power Antenna Pin?

Home / the12volt's Install Bay / Car Audio / Sony MEX-N5300BT, Power Antenna Pin?

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

i am an idiot

Platinum - Posts: 13,667

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: January 10, 2021 at 10:44 AM / IP Logged

Press and hold source button till the time is displayed. If you tap it too long the display will go blank and you will not be able to get to the following menu. Tap volume knob to get to the menu, turn vol knob to get to General settings. Tap and then turn to CAUT ALARM. Whole word is not displayed, but you will get it. Tap then turn that to off. This will stop the beeping and the powering of the antenna wire.

Back to Top

namyenruoj

Copper - Posts: 64

Joined: May 27, 2009

Location: British Columbia, Canada

Posted: January 10, 2021 at 11:00 AM / IP Logged

Thank you all. You guys are awesome. It all make sense all your comments. I will try them out and see what happens. Happy New Year guys.

Back to Top

namyenruoj

Copper - Posts: 64

Joined: May 27, 2009

Location: British Columbia, Canada

Posted: February 06, 2021 at 11:09 PM / IP Logged

Just to give you guys uodate. I did take "i am an idiot advice" to disable the CAUT ALARM and now it works according to what i want. When the unit is turned on my power antenna goes up and when the unit is turned off antenna goes down completely. Thanks for all your advice

Back to Top

< Prev Page

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.