the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

VSS Signal Splitter to Speedometer and ECM


Post ReplyPost New Topic
< Prev Topic Next Topic >
jaytan1976 
Member - Posts: 1
Member spacespace
Joined: December 23, 2020
Location: Australia
Posted: December 23, 2020 at 1:37 AM / IP Logged Link to Post Post Reply Quote jaytan1976
what do you use to split the vss signal to the speedo gauge and ecm?
currently, i'm getting CEL vss error code 17 on my 1994 honda prelude si
i had to recently replaced the speedo and tacho, tapping the signal from the ecm to the gauges. i've put in voltage regulators and capacitors to clean up the signal to the electrical gauges. all works well but the voltage regulators and capacitors are 'stealing' the signal away from the ecm, tripping the error code.
jaytan1976

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, May 18, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer