the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Latching Relay Setup, Diode vs Resistor


Post ReplyPost New Topic
< Prev Topic Next Topic >
kramttocs 
Member - Posts: 24
Member spacespace
Joined: January 20, 2020
Location: Missouri, United States
Posted: December 27, 2020 at 4:58 PM / IP Logged Link to Post Post Reply Quote kramttocs
I am looking to implement this: https://www.the12volt.com/relays/relaydiagram21.html
The relay on the left has a diode. Does it need to be a diode? I have some 4pins iso 280 relays that have resistors but unsure if there is a specific need in this use case for a diode.
Thank you

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, December 7, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer