the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Kenwood DNX697S, 2Way or 3Way Speaker Setup


Post ReplyPost New Topic
< Prev Topic Next Topic >
trblsme82 
Member - Posts: 2
Member spacespace
Joined: July†16, 2020
Location: California, United States
Posted: January†20, 2021 at 11:34 AM / IP Logged Link to Post Post Reply Quote trblsme82
The headunit has the option of a 2 or 3way speaker setup and its throwing me for a loop. All my door speakers are running to their own amp and have a different sub and amp as well. I have a set of rca in each preout front rear and sub. I get nothing out of the front preout. Is it because Iím on the 3 way setup?
Ryan springfield

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, April 14, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer