the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2016 Nissan Sentra, Wiring for Head Unit with Navigation


Post ReplyPost New Topic
< Prev Topic Next Topic >
jbran809 
Member - Posts: 2
Member spacespace
Joined: January 23, 2021
Location: New York, United States
Posted: January 23, 2021 at 3:57 PM / IP Logged Link to Post Post Reply Quote jbran809
Looking to swap an OEM Nissan head unit from a 2016 Sentra (Part #: 25915-4AF1A) for an OEM unit from a 2019 Sentra (Part #: 2591A-5UD0A) that has Carplay/Android Auto integration. Before I begin this endeavor, I need to determine how the wiring differs between the two vehicles and/or head units. Thanks in advance.
mgoetz74 
Copper - Posts: 296
Copper spaceThis member consistently provides reliable informationspace
Joined: February 15, 2012
Location: United States
Posted: January 23, 2021 at 4:18 PM / IP Logged Link to Post Post Reply Quote mgoetz74
does the new one have bose? if it does you would have to have the bose amp to run the speakers since its a "dead head" other than that I don't see why it wouldn't. Don't know if those radio are vin locked to the car like chevy radios are
31 years as a installer. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!
jbran809 
Member - Posts: 2
Member spacespace
Joined: January 23, 2021
Location: New York, United States
Posted: January 23, 2021 at 4:39 PM / IP Logged Link to Post Post Reply Quote jbran809
My 2016 (which I plan on installing the 2019 radio in) has factory installed Bose audio. Couldn't find any specific mention about VIN locking on the 2019 unit from google searches.
i am an idiot 
Platinum - Posts: 13,340
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: January 23, 2021 at 7:23 PM / IP Logged Link to Post Post Reply Quote i am an idiot
Nissan does not use any kind of security on their decks.
mgoetz74 
Copper - Posts: 296
Copper spaceThis member consistently provides reliable informationspace
Joined: February 15, 2012
Location: United States
Posted: January 25, 2021 at 12:47 PM / IP Logged Link to Post Post Reply Quote mgoetz74
probably be a problem since the amp is built into the new deck where the bose amp is separate on the current one. You shouldn't amplifie a amplified signal, will be very distorted at low volumes. You would have to use amp integrator (pac lp6-4) on the speakers to drop the power output so the amp and handle it. Or completely rewire and take out the bose amp but you loose sub. You will also have to add the gps antenna to the new radio since the current one doesn't have one. Your probably better off putting in a aftermarket deck
31 years as a installer. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!
i am an idiot 
Platinum - Posts: 13,340
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: January 25, 2021 at 5:29 PM / IP Logged Link to Post Post Reply Quote i am an idiot
When installing an aftermarket radio into a Nissan with Bose, it never works properly with the aftermarket harness with the RCA inputs. We always use the one with speaker wires. I really do not see a problem with a bose to non bose or vice versa radio.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, June 18, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer