the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2014 Acura MDX, Line Output LC2I Install


Post ReplyPost New Topic
< Prev Topic Next Topic >
nscollini 
Member - Posts: 4
Member spacespace
Joined: January 23, 2021
Location: Ohio, United States
Posted: January 23, 2021 at 7:32 PM / IP Logged Link to Post Post Reply Quote nscollini
I've been searching and cannot find a difinitive answer on the best location to pull audio from?
Pre amp or post amp from factory sub wiring? (prefer this location)
Pre amp or post amp from front speakers?
Does anyone have a wiring diagram for the base model 14 mdx.
i am an idiot 
Platinum - Posts: 13,287
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: January 24, 2021 at 9:03 AM / IP Logged Link to Post Post Reply Quote i am an idiot
Note: The subwoofer wires are red - white (1); brown - gray (2) at the amplifier under center console, 24 pin plug, pins 3 - 2; 4 - 5 (without navigation) or 18 pin plug, pins 9 - 18; 8 pin plug, pins 7 - 8 (with navigation).
You must use the above wiring. That is the only speaker that gets the lower frequencies. Front door speaker will not work for what you are trying to do.
nscollini 
Member - Posts: 4
Member spacespace
Joined: January 23, 2021
Location: Ohio, United States
Posted: January 24, 2021 at 9:12 AM / IP Logged Link to Post Post Reply Quote nscollini
Can you clarify the wiring for non navigation model?
Am I pulling pre amp or post?
I'm not following you on which pins, sorry.
At the risk of sounding like an idiot, why can't I pull from the rear sub area? I assume it's because the frequency is higher in the rear (post amp)?
i am an idiot 
Platinum - Posts: 13,287
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: January 24, 2021 at 6:54 PM / IP Logged Link to Post Post Reply Quote i am an idiot
You can catch them at the sub. The wire colors will be the same at the driver or at the amplifier.
i am an idiot 
Platinum - Posts: 13,287
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: January 24, 2021 at 6:58 PM / IP Logged Link to Post Post Reply Quote i am an idiot
Red is positive   white is negative on voice coil number 1
Brown is Positive Grey is negative on voice coil number 2
nscollini 
Member - Posts: 4
Member spacespace
Joined: January 23, 2021
Location: Ohio, United States
Posted: January 24, 2021 at 7:04 PM / IP Logged Link to Post Post Reply Quote nscollini
Ok great! I assume I can wire tap them just before they go into the factory sub enclosure. Is that acceptable, or should I marry them in a different fashion?
nscollini 
Member - Posts: 4
Member spacespace
Joined: January 23, 2021
Location: Ohio, United States
Posted: February 04, 2021 at 5:44 PM / IP Logged Link to Post Post Reply Quote nscollini
i am an idiot wrote:
Red is positive   white is negative on voice coil number 1
Brown is Positive Grey is negative on voice coil number 2
Worked perfect! Thank you for taking the time out to help me.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, April 14, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer