the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Viper 5305V Won’t Go Into Programing Mode


Post ReplyPost New Topic
< Prev Topic Next Topic >
rtricar 
Member - Posts: 1
Member spacespace
Joined: June 04, 2021
Location: New Jersey, United States
Posted: June 25, 2021 at 8:49 AM / IP Logged Link to Post Post Reply Quote rtricar
everything works fine...i cant get unit to go into programing mode
randy t
silvercivicsir 
Copper - Posts: 400
Copper spacespace
Joined: November 21, 2003
Posted: June 25, 2021 at 2:27 PM / IP Logged Link to Post Post Reply Quote silvercivicsir
did you hook up door pin? green wire has to see ground before you can get into programing (transmitter programing)

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer