Simple Board For Lights

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / Simple Board For Lights

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

viperwolf

Member - Posts: 1

Joined: July 09, 2021

Location: Tennessee, United States

Posted: July 09, 2021 at 8:24 PM / IP Logged

My Vehicle is a 2020 Ford Everest Titanium 4x4

I have red fog lights in the rear that work from a switch in my light selector. Im replacing the light bulb socket so I can fit a dual (high/Low) LED.

I would like to build a basic circuit, maybe with a 555 timer or some type of LM.

Low-running

High 1- Brake

High 2- Fog "however I would like the brake lights to blink (turn signal speed) if the fog lights are on"

I made this work with 3 relays and a blinker relay, but thats a little ridiculous lol

If someone can help and give me a schematic for dummies (something I can understand), I would greatly appreciate it.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.