1994 Chevrolet Suburban, Remote Start, Keyless Entry

Hi guys I have a compustar 920s that comes the cm-900 module I have the basic wiring figured out. I just need help with the unlock/lock/ Parking lights/horn. I’ve spent 2 weeks trying to wrap my head around it and I think I’m just over complicating it.1994 suburban

6.5 turbo diesel

Power Lock.........lt. blue (+).........@ either door boot \ Need relays to make (-) to (+) conversion      Power Unlock.......black/red (+)........@ either door boot / Use Door Lock Relay diagram in Relays section The CM900 outputs (-) Door Lock/Unlock signals, your vehicle needs (+) signals.     https://www.the12volt.com/relays/relaydiagram8.html Parking Lights.....brown (+)............@ headlight switch...................CN1-2 Green/White Horn Trigger.......black (-)............@ steering column harness............CN3-7 White Main ignition harness The two Red wires are +12V constant. The Starter wire is Yellow or Violet. The Ignition wire is Pink. The two Accessories are Orange and Brown. Use the CM900 Blue at CN1-5 for the Brown ACC wire and set CM900 internal jumper to ACC. Soldering is fun!

What about cn3-1 green with white?1994 suburban

6.5 turbo diesel

That wire outputs a low power (-) Parking Light signal. Your vehicle needs a (+) signal to turn on the Parking Lights. The thick Green/White at CN1-2 is a (+) output rated at 10 amps.Soldering is fun!