Idatalink, 2011 GMC Sierra, 3 Flashes Then 9 Flashes

Home / the12volt's Install Bay / Car Security and Convenience / Idatalink, 2011 GMC Sierra, 3 Flashes Then 9 Flashes

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

fwoodjr123

Member - Posts: 13

Joined: March 01, 2021

Location: New Jersey, United States

Posted: November 05, 2021 at 8:20 AM / IP Logged

I have I believe to be one of the first idatalink r/s modules in my

11 Sierra that worked fine u til I lost my fob. So the setup is the idatalink then it goes to the decoder which I have a 2cs and my remote was a 4 button compustar. Once I lost the remote I tried searching for programming a new compuatar remote but can’t find anything on it. I even thought about buying a new decoder the ft-d100 but it to does not include a remote. So I figured I’d get myself a oem Chevy fob because everything I read says 3x start. Programmed my oem remote press lock 3x I get 3 flashes then 9 flashes no start obviously. Help?

Signature

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.