the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Astroflex BBW Unable to Program Remotes.


Post ReplyPost New Topic
< Prev Topic Next Topic >
jacobusm 
Member - Posts: 4
Member spacespace
Joined: November 19, 2021
Location: Alberta, Canada
Posted: November 19, 2021 at 3:00 PM / IP Logged Link to Post Post Reply Quote jacobusm
I have a 2008 Honda Ridgeline .It has a AstroStart Astroflex BBW Item 392-127-317 Rev.1 remote starter. I recently discovered that the wire for the antenna was cut when they replaced the windscreen months ago. I bought a new antenna, wire and remote. I tried to program the remotes but it's not working. I get the four flashes from the parklights but nothing happens when I press the lock or start button on the remote. Is there a way to find out if the brain is not working because I can hear the clicking when I start the programming. The LED on the module blinks when the brake pedal is pushed. The LED flashes when the engine is running. The switch is ON. New battery in the remote. I would really appreciate any help or info to get the remote starter to work since I don't have the money to install a new remote starter. I took pictures of the setup if need be.
jacobusm 
Member - Posts: 4
Member spacespace
Joined: November 19, 2021
Location: Alberta, Canada
Posted: November 19, 2021 at 4:51 PM / IP Logged Link to Post Post Reply Quote jacobusm
Forgot to mention. It's a regular key start. And the remotes are 2205A and 4204A.
silvercivicsir 
Copper - Posts: 298
Copper spacespace
Joined: November 21, 2003
Posted: November 22, 2021 at 1:38 PM / IP Logged Link to Post Post Reply Quote silvercivicsir
have you tried, flip dip switch 8 to on, and then press the brakes.. then press lock on each remote, then flip 8 to off, and then press the brakes.
jacobusm 
Member - Posts: 4
Member spacespace
Joined: November 19, 2021
Location: Alberta, Canada
Posted: November 22, 2021 at 8:32 PM / IP Logged Link to Post Post Reply Quote jacobusm
Yes but unfortunately that also didn't work. I want to know if the brain got fried when the cut the wire of the antenna. I was hoping there was a way to test if the brain or module is damaged. Thanks
silvercivicsir 
Copper - Posts: 298
Copper spacespace
Joined: November 21, 2003
Posted: November 23, 2021 at 7:45 PM / IP Logged Link to Post Post Reply Quote silvercivicsir
when you do the flip 8, brake and then press lock of the remotes, the led on the brain should flash.. if it doesn't I would suspect a shorted antenna port.
jacobusm 
Member - Posts: 4
Member spacespace
Joined: November 19, 2021
Location: Alberta, Canada
Posted: November 25, 2021 at 7:57 PM / IP Logged Link to Post Post Reply Quote jacobusm
Thanks guys I got it working! Appreciate all your help

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, December 6, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer