Viper PKE 2102T Not Passively Working

Home / the12volt's Install Bay / Car Security and Convenience / Viper PKE 2102T Not Passively Working

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

phirephoto

Member - Posts: 1

Joined: September 02, 2016

Location: California, United States

Posted: February 21, 2022 at 11:37 PM / IP Logged

HI All,

I have a Viper PKE 2102T and a Viper 5706V alarm. The PKE button arms and disarms the system, but it doesn't passively unlock. I disabled valet mode on the PKE (double press PKE button quickly, then press and hold). The alarm is not in valet mode. Any ideas what to do? I think I had seen this before - there's a way to turn off the passive mode? But I can't recall the trick.

This is a 2018 Nissan Leaf.

Thanks :)

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.