the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Power Mirror Wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
lambeau40 
Member - Posts: 1
Member spacespace
Joined: October 08, 2022
Location: Wisconsin, United States
Posted: October 08, 2022 at 10:49 PM / IP Logged Link to Post Post Reply Quote lambeau40
Ok, so I have a custom application where I'm trying to wire up some power mirrors. The mirrors are from an early 80's Camaro and have 4 wires. 2 for up/down and 2 for left/right. The switch I am using is from a Pontiac G8 and only has 2 wires. If I check voltage on 1 of the wires I get 12 volts when I press up or right. And the other has 12 volts when I press down or left. Is there any way to wire this with relays or diodes to make it work with these mirrors? Any help would be greatly appreciated!!!

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, February 2, 2023 • Copyright © 1999-2023 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer