spacer spacer spacer spacer

2005 Toyota Camry V6, Remote Start, Trigger Wire Connection

Post ReplyPost New Topic
< Prev Topic Next Topic >
Member - Posts: 2
Member spacespace
Joined: October 29, 2022
Location: Ontario, United States
Posted: October 29, 2022 at 6:50 PM / IP Logged Link to Post Post Reply Quote ngen33r
I cannot for the life of me seem to find a place to connect a remote start (-) Start Activation wire on my Camry V6 with the factory anti-theft system. I have the full wiring diagram for the car, but it seems that the relays are internal to the body control ECM. The system is a basic Cool Start RS-00 that includes a key bypass module. The instructions are flat out terrible but I have fumbled my way down to this last wire. It relies on 3 negative pulses to activate the start with the factory remote. I would be happy to smash it at this point and buy something better if that is what it comes to.
i am an idiot 
Platinum - Posts: 13,679
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: October 31, 2022 at 3:16 PM / IP Logged Link to Post Post Reply Quote i am an idiot
Check this wire.
Power Lock      blue / YELLOW       -       DKP or bottom of fusebox, 20 pin plg
I have no idea if this wire changes state when using the factory keyfob.
Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB
Member - Posts: 2
Member spacespace
Joined: October 29, 2022
Location: Ontario, United States
Posted: November 06, 2022 at 9:53 PM / IP Logged Link to Post Post Reply Quote ngen33r
So I did more digging and the kit that I purchased requires an additional relay wired in to trigger activation from the lock solenoids. Since the OEM fobs dont have great range, I opted for another kit that has new remotes. The wiring is the same so I didn't lose any time invested and I was lucky, because all connections were wrapped and soldered. The system is now fully functional but I have some odd behavior. The vechcle is a V6 with OEM Toyota security. With the OEM fobs, I get a security system chime with lock and 2 chimes with unlock. It is not from the horn, but a different buzzer. With the new fobs, I get lock and unlock, but no chimes and no light flashes. I know i can code in the light flashes, but I am wondering if I don't get the chime if the OEM security is not activating, or if it will not deactivate with the new remote. Not a big deal, I just don't want to unlock the doors with the new fob and have the alarm going off at 4am. Only thing left is to add the optional trunk release wire.
Note to anyone doing a 5th gen Camry V6 (2002-2006) get a kit that does NOT use the factory fobs. It is a much more straight forward install, atleast with the cheaper kits on Amazon.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Friday, June 14, 2024 • Copyright © 1999-2024, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer