the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Viper 5706v Remote Start Wiring, 2000 Honda Civic


Post ReplyPost New Topic
< Prev Topic Next Topic >
jdm99prelude 
Member - Posts: 9
Member spacespace
Joined: October 23, 2014
Location: Texas, United States
Posted: November 07, 2022 at 8:17 PM / IP Logged Link to Post Post Reply Quote jdm99prelude
on the 10-pin RS Harness, do the pink(ignition 1 input/output), and orange (accesory output) need to be connected? and to which wire...installing on a 2000 Honda Civic.
geepherder 
Platinum - Posts: 3,643
Platinum spaceThis member consistently provides reliable informationspace
Joined: October 27, 2003
Posted: November 07, 2022 at 10:14 PM / IP Logged Link to Post Post Reply Quote geepherder
Here's a link to the wiring info for your car:
https://www.the12volt.com/installbay/alarmdetail/1054.html
Even if you decide you don't want to use the remote start, you should at least connect the ignition 1 wire as it's used for sensing key position. This is used when you enter valet mode with the key, or to trigger the alarm if someone attempts to start without disarming first.
Accessory is used to power the heating and air conditioning which is why many people use remote start.
My ex once told me I have a perfect face for radio.
jdm99prelude 
Member - Posts: 9
Member spacespace
Joined: October 23, 2014
Location: Texas, United States
Posted: November 08, 2022 at 1:20 PM / IP Logged Link to Post Post Reply Quote jdm99prelude
thanks for the wiring diagram, the wire for the accessory is blk/yellow if somebody wanna update it, so do i connect those wires with the red/blk (fused 12v acc wire) and red (ignition 1 wire)on the remote start harness also? so the only wires i dont use on it is:
PINK/BLACK (+) FLEX RELAY INPUT #87a key side (if required) of FLEX RELAY
PINK/WHITE (+) IGNITION 2 / FLEX RELAY OUTPUT #30 of FLEX RELAY
geepherder 
Platinum - Posts: 3,643
Platinum spaceThis member consistently provides reliable informationspace
Joined: October 27, 2003
Posted: November 08, 2022 at 8:56 PM / IP Logged Link to Post Post Reply Quote geepherder
The Viper red wires in the remote start harness are constant power and do not get connected to your vehicle's ignition and accessory wires. It can look misleading in the manual. They are the supply for the built in ignition and accessory relays.
The pink connects to your vehicle's ignition wire and the orange (IIRC) connects to your vehicle's accessory wire.
My ex once told me I have a perfect face for radio.
jdm99prelude 
Member - Posts: 9
Member spacespace
Joined: October 23, 2014
Location: Texas, United States
Posted: November 09, 2022 at 12:15 PM / IP Logged Link to Post Post Reply Quote jdm99prelude
so do i tie all the RED together for 12v constant, and all PINk to ignition 1 and dont need ignition 2 wire and ORANGE to accessory? OR do i just go what the manual says which is
Remote Start, White 10-pin heavy gauge connector
1 NC No Connection
2 RED/BLACK (+) FUSED 12V ACCESSORY/STARTER INPUT
3 PINK/BLACK (+) FLEX RELAY INPUT #87a key side (if required) of FLEX RELAY
4 PINK/WHITE (+) IGNITION 2 / FLEX RELAY OUTPUT #30 of FLEX RELAY
5 RED (+) FUSED 12V IGNITION 1 INPUT
6 GREEN (+) STARTER INPUT (KEY SIDE OF THE STARTER DISABLE)
7 VIOLET (+) STARTER OUTPUT (CAR SIDE OF THE STARTER DISABLE)
8 ORANGE (+) ACCESSORY OUTPUT
9 RED/WHITE (+) FUSED 12V IGNITION 2 / FLEX RELAY INPUT 87
10 PINK (+) IGNITION 1 INPUT/OUTPUT
or do i pair it like this...
RED/BLACK (+) FUSED 12V ACCESSORY/STARTER INPUT
ORANGE (+) ACCESSORY OUTPUT
RED (+) FUSED 12V IGNITION 1 INPUT
PINK (+) IGNITION 1 INPUT/OUTPUT
RED/WHITE (+) FUSED 12V IGNITION 2 / FLEX RELAY INPUT 87
PINK/WHITE (+) IGNITION 2 / FLEX RELAY OUTPUT #30 of FLEX RELAY
geepherder 
Platinum - Posts: 3,643
Platinum spaceThis member consistently provides reliable informationspace
Joined: October 27, 2003
Posted: November 09, 2022 at 7:25 PM / IP Logged Link to Post Post Reply Quote geepherder
All the reds in the remote start harness (red, red/black and red/white) with fuses connect to constant power. Pink is ignition 1. If you don't have an ignition 2 or accessory 2 the pink/white wire will not be used. Orange will connect to your accessory wire.
My ex once told me I have a perfect face for radio.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, February 2, 2023 • Copyright © 1999-2023 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer