the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2-Wire Dry Contacts To Generator Start/Stop Switch


Post ReplyPost New Topic
< Prev Topic Next Topic >
solarpwr 
Member - Posts: 1
Member spacespace
Joined: March 20, 2023
Location: Florida, United States
Posted: March 20, 2023 at 2:43 PM / IP Logged Link to Post Post Reply Quote solarpwr
I need to convert 2-wire dry contact closures (close = Start, Open = Stop; then nothing) to activate the Start/Stop SPST switch on a generator.
The 2-wire contact closes to tell the device to start-- it needs a momentary contact closure (1-2 sec) to do so. The 2-wire contacts stay closed during device run time.
The 2-wire contact open to tell the device to stop-- it needs a second momentary contact closure across the same set of contacts.
My issue is with trying to isolate the "Stop" command circuits from the "Start" command circuits. As the generator uses only one SPST momentary input to both start and stop I can't have the Stop command interfere with the Start process while still needing the 2-wire open to generate a second momentary Stop contact closure on the generator switch.
Just can't seem to get my mind around this but know there must be a solution/
COME ON-- Has to be a good brain out there somewhere that can figure this out after 2+ months!
Solar Power

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, April 14, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer