Viper Remote Start On Hot Rods

Home / the12volt's Install Bay / Car Security and Convenience / Viper Remote Start On Hot Rods

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

52-chebby

Member - Posts: 14

Joined: March 05, 2020

Location: New Brunswick, Canada

Posted: March 27, 2023 at 4:04 PM / IP Logged

I have an extensively modified 1952 Chevy pickup. It has a really complex electrical system (as well equipped as my 2012 Town and Country. It also has a 350 cid motor with Sniper fuel injection...

I'm looking into getting a remote starter (Viper 5305v, or Viper 5706v) that should include car security alarm as well.

My truck is not computerized so my question is will these remote start units work with my project?

Thank you for your time.

Back to Top

Ween

Platinum - Posts: 1,364

Joined: August 01, 2004

Location: Illinois, United States

Posted: March 27, 2023 at 5:45 PM / IP Logged

The Sniper system depending on set up can control ignition timing. Either way, the remote starter has a tach input for engine monitoring. I would advise using this connection. Also the Sniper system needs to "wake up" as it may not start immediately. The remote starter has a delay available for diesel engines that delays the crank/start output...(glow plug heating).

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.